Toyota Urban Cruiser 2014+ Replacement TPMS Sensor

£45.60 inc VAT

Replacement Huf IntelliSens TPMS sensor for Toyota Urban Cruiser Jan/2014+

SKU: Toyota Urban Cruiser 14+ Category: Tag:


Replacement Huf IntelliSens TPMS sensor for Toyota Urban Cruiser


OEM Part number – 42607-30070

Huf-Clamp-in universal TPMS sensor

Huf IntelliSens 433Mhz

Manufactured by Huf (formerly Beru)

Frequency 433 MHz

The IntelliSens is the direct-measurement universal sensor from Huf offering the greatest accuracy and compatible with the systems of all car models. The universal sensor is a pre-programmed sensor for direct-measurement tire pressure monitoring systems. All of the information needed is already on the sensor and only has to be configured. The technical design of the configurable sensor cuts down on installation time, and the waiting time is shortened even further when the IntelliSens is installed during tire changes – for instance, when switching between summer and winter tires.

Torque Nut: 4Nm-35in-lbs

Torque Screw: 4Nm-35in-lbs

Torque Core: 0.5Nm-4in-lbs

Please refer to the relearning procedure below

Relearn procedure: OBD + Programming tool

Use copy/clone to avoid the relearn. Alternatively, a scan tool is required for OBD relearn.

(More information on cloning can be found on our FAQ page or by Phoning us on 01254301021)

  • Note: if vehicle is equipped with a Main/2nd selection switch ensure the switch matches the position you intend to Write IDs to
  • Inflate Tyres to correct pressure
  • Following on tool prompts, read all sensor IDs using tool
  • Following on tool prompts, connect tool to OBD II port
  • Tool will prompt you to ensure the key is on/engine off. Following the prompts, continue through the process until toll indicates relearn successful
  • Leave vehicle in the ON position and re-capture all 4 IDs
  • Start vehicle and make sure light has gone off
  • After writing IDs, disconnect tool and re-activate sensors with ignition ON

You may also like…