Peugeot 4008 2015-2017 Replacement TPMS Sensor

£45.60 inc VAT

Replacement Schrader EZ-Sensor for Peugeot 4008 Jun/2015 – Jun/2017

£
SKU: Peugeot 4008 15-17 Category: Tag:

Description

Replacement Schrader EZ-Sensor for Peugeot 4008

Jun/2015 – Jun/2017

OEM Part number – 1612477080 (Push Button)

OEM Part number –1612477080 (Standard Key)

Schrader Snap-in tpms sensor

 

Schrader EZ-Sensor 433Mhz

EZ-sensor® is compatible with all required TPMS installation, re-learn, and verification functions. Features Schrader’s patented snap-in TPMS valve (with aluminum stem options), to help minimize installation time. It is also “future-proofed” against current and pending OE technology, including auto-location features.

 

 


Please refer to the relearning procedure below

Relearn procedure: OBD + Programming tool

Use copy/clone to avoid the relearn. Alternatively, a scan tool is required for OBD relearn.

(More information on cloning can be found on our FAQ page or by Phoning us on 01254301021)

Push Button:

Relearn procedure: OBD

  • Select either
    • Change Pressure to Activate Sensors
    • Use a second activation Tool to Activate Sensors
    • (If using “Change Pressure to Activate Sensors” over-inflate tyres to correct pressure plus 7psi/0.5Bar
  • Ensure ignition is turned OFF and apply Parking Brake
  • Read all sensor IDs using tool
  • Ensure all sensors are all set to Park Mode, sensors for this vehicle that show “Park” or “Drive” when read are already in the correct mode, otherwise use the “Set to Park” command in the Relearn Toolkit
  • Turn Ignition ON
  • Connect tool to OBD II port
  • Follow Screen prompts and then activate Front Left Sensor, Sensor may take up to 10 seconds to respond
  • Repeat for RF, RR, and LR
  • Tool will display each wheel in turn and “Success” when relearn is completed
  • NOTE: If using Change Pressure to Activate Sensors, your TPMS light may be ON, Check tyres are the correct pressure

 

Standard Key:

Relearn procedure: OBD

  • Select either
    • Change Pressure to Activate Sensors
    • Use a second activation Tool to Activate Sensors
    • (If using “Change Pressure to Activate Sensors” over-inflate tyres to correct pressure plus 7psi/0.5Bar
  • Ensure ignition is turned OFF and apply Parking Brake
  • Read all sensor IDs using tool
  • Ensure all sensors are all set to Park Mode, sensors for this vehicle that show “Park” or “Drive” when read are already in the correct mode, otherwise use the “Set to Park” command in the Relearn Toolkit
  • Turn Ignition ON
  • Connect tool to OBD II port
  • Follow Screen prompts and then activate Front Left Sensor, Sensor may take up to 10 seconds to respond
  • Repeat for RF, RR, and LR
  • Tool will display each wheel in turn and “Success” when relearn is completed
  • NOTE: If using Change Pressure to Activate Sensors, your TPMS light may be ON, Check tyres are the correct pressure