Mitsubishi ASX 2017+ Replacement TPMS Sensor

£45.60 inc VAT

Replacement Huf IntelliSens TPMS sensor for Mitsubishi ASX Jul/2017+

£
SKU: Mitsubishi ASX 17+ Category: Tag:

Description

Replacement Huf IntelliSens TPMS sensor for Mitsubishi ASX

Jul/2017+

OEM Part number – 4250C477

Huf-Clamp-in universal TPMS sensor

 

Huf IntelliSens 433Mhz

Manufactured by Huf (formerly Beru)

Frequency 433 MHz

The IntelliSens is the direct-measurement universal sensor from Huf offering the greatest accuracy and compatible with the systems of all car models. The universal sensor is a pre-programmed sensor for direct-measurement tire pressure monitoring systems. All of the information needed is already on the sensor and only has to be configured. The technical design of the configurable sensor cuts down on installation time, and the waiting time is shortened even further when the IntelliSens is installed during tire changes – for instance, when switching between summer and winter tires.

Torque Nut: 4Nm-35in-lbs

Torque Screw: 4Nm-35in-lbs

Torque Core: 0.5Nm-4in-lbs

Please refer to the relearning procedure below

Relearn procedure: OBD + Programming tool

Use copy/clone to avoid the relearn. Alternatively, a scan tool is required for OBD relearn.

(More information on cloning can be found on our FAQ page or by Phoning us on 01254301021)

  • Select either
    • Change Pressure to Activate Sensors
    • Use a second activation Tool to Activate Sensors
    • (If using “Change Pressure to Activate Sensors” over-inflate tyres to correct pressure plus 7psi/0.5Bar
  • Ensure ignition is turned OFF and apply Parking Brake
  • Read all sensor IDs using tool
  • Ensure all sensors are all set to Park Mode, sensors for this vehicle that show “Park” or “Drive” when read are already in the correct mode, otherwise use the “Set to Park” command in the Relearn Toolkit
  • Turn Ignition ON
  • Connect tool to OBD II port
  • Follow Screen prompts and then activate Front Left Sensor, Sensor may take up to 10 seconds to respond
  • Repeat for RF, RR, and LR
  • Tool will display each wheel in turn and “Success” when relearn is completed
  • NOTE: If using Change Pressure to Activate Sensors, your TPMS light may be ON, Check tyres are the correct pressure