Vauxhall Insignia 2020+ Replacement TPMS Sensor
£45.60 inc VAT
Replacement Huf IntelliSens TPMS sensor for Vauxhall Insignia 2020+
Description
Replacement Huf IntelliSens TPMS sensor for Vauxhall Insignia
01/2020-12/2021
OEM Part number – 13597645
Huf IntelliSens 433Mhz
Manufactured by Huf (formerly Beru)
Frequency 433 MHz
The IntelliSens is the direct-measurement universal sensor from Huf offering the greatest accuracy and compatible with the systems of all car models. The universal sensor is a pre-programmed sensor for direct-measurement tire pressure monitoring systems. All of the information needed is already on the sensor and only has to be configured. The technical design of the configurable sensor cuts down on installation time, and the waiting time is shortened even further when the IntelliSens is installed during tire changes – for instance, when switching between summer and winter tires.
Torque Nut: 4Nm-35in-lbs
Torque Screw: 4Nm-35in-lbs
Please refer to the relearning procedure below
Relearn procedure: OBD + Programming tool
Use copy/clone to avoid the relearn. Alternatively, a scan tool is required for OBD relearn.
(More information on cloning can be found on our FAQ page or by Phoning us on 01254301021)
- If replacement sensors have been fitted, vehicle will need to be stationary for minimum of 15 minutes.
- If required, place the vehicle into the relearn mode using the appropriate dashboard controls.
- Drive above 32kmh (20mph) until the new sensor IDs are learned by the vehicle.
- This may take up to 20 minutes depending on the model.
