Mitsubishi Outlander 2014+ Replacement TPMS Sensor
£45.60 inc VAT
Replacement Huf IntelliSens TPMS sensor for Mitsubishi Outlander Jan/2014+
Description
Replacement Huf IntelliSens TPMS sensor for Mitsubishi Outlander
Jan/2014+
OEM Part number – 4350A478
Huf IntelliSens 433Mhz
Manufactured by Huf (formerly Beru)
Frequency 433 MHz
The IntelliSens is the direct-measurement universal sensor from Huf offering the greatest accuracy and compatible with the systems of all car models. The universal sensor is a pre-programmed sensor for direct-measurement tire pressure monitoring systems. All of the information needed is already on the sensor and only has to be configured. The technical design of the configurable sensor cuts down on installation time, and the waiting time is shortened even further when the IntelliSens is installed during tire changes – for instance, when switching between summer and winter tires. Available in Clamp-in and Snap-in valve stems.
Torque Nut: 4Nm-35in-lbs
Torque Screw: 4Nm-35in-lbs
Please refer to the relearning procedure below
Relearn procedure: OBD + Programming tool
Use copy/clone to avoid the relearn. Alternatively, a scan tool is required for OBD relearn.
(More information on cloning can be found on our FAQ page or by Phoning us on 01254301021)
- Select either
- Change Pressure to Activate Sensors
- Use a second activation Tool to Activate Sensors
- If using “Change Pressure to Activate Sensors” over Inflate tyres to correct pressure plus 7psi/0.5 Bar
- Ensure ignition is turned OFF and apply Parking brake
- Read all sensor IDs using tool
- Ensure all Sensors are to Park Mode, sensors for this vehicle that show “Park” or “Drive” when read are already in the correct mode, otherwise use the “Set to Park” command in the Relearn Toolkit
- Turn Ignition ON
- Connect tool to OBD II port
- Follow Screen prompts and then activate Front Left sensor, Sensor may take up to 10 seconds to respond
- Repeat for RF, RR and LR
- Tool will display each wheel in turn and “Success” when relearn is completed
- Note: If using Change Pressure to Activate Sensors, your TPMS light may be ON, check tyres are the correct pressure
