Mitsubishi Mirage 2014 Replacement TPMS Sensor
£45.60 inc VAT
Replacement Schrader EZ-Sensor for Mitsubishi Mirage 2014
Description
Replacement Schrader EZ-Sensor for Mitsubishi Mirage
2014
OEM Part number – 4250A478
Schrader EZ-Sensor 433Mhz
EZ-sensor® is compatible with all required TPMS installation, re-learn, and verification functions. Features Schrader’s patented snap-in TPMS valve (with aluminum stem options), to help minimize installation time. It is also “future-proofed” against current and pending OE technology, including auto-location features.
Please refer to the relearning procedure below
Relearn procedure: OBD + Programming tool
Use copy/clone to avoid the relearn. Alternatively, a scan tool is required for OBD relearn.
(More information on cloning can be found on our FAQ page or by Phoning us on 01254301021)
- Select either
- Change Pressure to Activate Sensors
- Use a second activation Tool to Activate Sensors
- (If using “Change Pressure to Activate Sensors” over-inflate tyres to correct pressure plus 7psi/0.5Bar
- Ensure ignition is turned OFF and apply Parking Brake
- Read all sensor IDs using tool
- Ensure all sensors are all set to Park Mode, sensors for this vehicle that show “Park” or “Drive” when read are already in the correct mode, otherwise use the “Set to Park” command in the Relearn Toolkit
- Turn Ignition ON
- Connect tool to OBD II port
- Follow Screen prompts and then activate Front Left Sensor, Sensor may take up to 10 seconds to respond
- Repeat for RF, RR, and LR
- Tool will display each wheel in turn and “Success” when relearn is completed
- NOTE: If using Change Pressure to Activate Sensors, your TPMS light may be ON, Check tyres are the correct pressure
