Brookside Mill, Lancashire
+44 (0)1254 301021 (Opt 4)
Mon. - Fri. 08:30 am - 17:00 pm

HomeShopFordFord Kuga 2020+ Replacement TPMS Sensor

Ford Kuga 2020+ Replacement TPMS Sensor

£45.60 inc VAT

Huf UVS4040 Original Replacement TPMS Sensor for Ford Kuga

Category: Tag:

Description

Huf UVS4040 Original Replacement TPMS Sensor for Ford Kuga

01/2020+

OEM Part number – JX7T 1A180 C

Huf UVS4040 Original Replacement TPMS Sensor

 

Huf IntelliSens 433Mhz

Manufactured by Huf (formerly Beru)

Frequency 433 MHz

The IntelliSens is the direct-measurement universal sensor from Huf offering the greatest accuracy and compatible with the systems of all car models. The universal sensor is a pre-programmed sensor for direct-measurement tire pressure monitoring systems. All of the information needed is already on the sensor and only has to be configured. The technical design of the configurable sensor cuts down on installation time, and the waiting time is shortened even further when the IntelliSens is installed during tire changes – for instance, when switching between summer and winter tires.

IntelliSens Logo

Torque Nut: 4Nm-35in-lbs

Torque Screw: 4Nm-35in-lbs

Torque Core: 0.5Nm-4in-lbs

 

 


Please refer to the relearn procedure below

Relearn Type- Stationary

• Apply parking brake
• Inflate tyres to correct pressure.
• With Ignition OFF, depress and release the brake pedal.
• Switch the Ignition from OFF to ON (Operating), three times ending in the ON (Operating) position.
• Depress brake pedal and release.
• Turn the Ignition switch to the OFF position.
• Switch the Ignition from OFF to ON (Operating), three times ending in the ON (Operating) position.
• The horn will sound once and the TPMS (Tyre Pressure Monitoring System) indicator flashes when the learning mode has been successfully activated. If present, the Driver information system shows “TRAIN Left Front (LF) TIRE”.
• Read all sensors.
To Set Pressure thresholds.
• Inflate Tyres to correct pressure.
• Turn Ignition ON
• Using the information display control, navigate to MENU/SETTINGS, Vehicle INFORMATION/SETUP, Driver assist, Tyre pressure/monitor sys.
• Press and hold the OK button until confirmation appears.
• Alternatively, if the vehicle has a TPMS reset button, press and hold the button until confirmation appears.