Citroen C4 Aircross 2016-2017 Tyre Pressure Monitor (TPMS)
£45.60 inc VAT
Replacement Schrader EZ TPMS sensor for Citroen C4 Aircross Jun/2015 – Jun/2017
Description
Replacement Schrader EZ TPMS sensor for Citroen C4 Aircross
2016-2017
OEM Part number – 1612477080
Schrader EZ-Sensor 433Mhz
EZ-sensor® is compatible with all required TPMS installation, re-learn, and verification functions. Features Schrader’s patented snap-in TPMS valve, with aluminum stem options, to help minimize installation time. It is also “future-proofed” against current and pending OE technology, including auto-location features.
Please refer to the relearn procedure below
Relearn Type – OBD + Programming Tool
Standard Key
Relearn procedure: OBD + Programming Tool
- Select either:
- Change Pressure to Activate Sensors
- Use a second activation Tool to Activate Sensors
- If using “Change Pressure to Activate Sensors” over inflate tyres to correct pressure plus 7psi/0.5Bar
- Ensure ignition is turned OFF and apply parking brake
- Read all sensor IDs using tool
- Ensure all Sensors are all set to Park Mode, sensors for this vehicle that show “Park” or “Drive” when read are already in the correct mode, otherwise use the “Set to Park” command in the relearn toolkit
- Turn ignition ON
- Connect tool OBD II port
- Follow screen prompts and then activate Front Left Sensor, Sensor may take up to 10 seconds to respond
- Repeat for RF, RR and LR
- Tool will display each wheel in turn and “Success” when relearn is completed
- NOTE: If using Change Pressure to Activate Sensors, your TPMS light may be ON, Check tyres are the correct pressure
Push Button
Relearn procedure: OBD + Programming Tool
- Select either:
- Change Pressure to Activate Sensors
- Use a second activation Tool to Activate Sensors
- If using “Change Pressure to Activate Sensors” over inflate tyres to correct pressure plus 7psi/0.5Bar
- Ensure ignition is turned OFF and apply parking brake
- Read all sensor IDs using tool
- Ensure all Sensors are all set to Park Mode, sensors for this vehicle that show “Park” or “Drive” when read are already in the correct mode, otherwise use the “Set to Park” command in the relearn toolkit
- Turn ignition ON
- Connect tool OBD II port
- Follow screen prompts and then activate Front Left Sensor, Sensor may take up to 10 seconds to respond
- Repeat for RF, RR and LR
- Tool will display each wheel in turn and “Success” when relearn is completed
- NOTE: If using Change Pressure to Activate Sensors, your TPMS light may be ON, Check tyres are the correct pressure
